Adaptor Kit to Fit Range Rover L322 Wheels (02 -05)
onto Range Rover P38
This kit comprises of 20 x wheel nuts and 4 x hub adaptor rings ( also called spigot rings ) to enable you to fit early L322 wheels to the Range Rover P38
If you want to fit 2006 on Range Rover wheels or Range Rover Sport wheels to your P38 see our other items as this kit won't be suitable.
The following vehicles all have the same PCD and number of studs so wheels can be swapped between these vehicles as long as you have the correct fitting kit. Range Rover Sport 2005 on
· Range Rover L322 03 -05
· Range Rover L322 06 on
· Range Rover P38 upto 2002
· Landrover Discovery 2 1998 on
· Landrover Discovery 3 2005 on
· Landrover Discovery 4 2010 on
In addition to the same stud pattern these vehicles all have the same wheel stud thread. So what is to stop you just buying a set of these wheels and bolting them on your P38 ? Well 2 things mainly....
1) The wheel nuts are all different ( the size and shape of the recess in the wheel where the nuts "sit" much match the shape of the wheel nut itself ). This kit includes 20 x wheels nuts that fit the standard Range Rover L322 wheels from 2002 until 2005. These wheels have a flat base to the wheel nut recess ( not tapered ). If you have the six spoke wheel as shown in the picture there are 2 types ones with shallow dimples and one with holes - see pictures. These nuts fit the wheels with the holes not dimples. The thread on these nuts is 14x1.50. These nuts are made from high strength steel and have a bright zinc any corrosive finish.
2) Central hub diameters are different. All wheels are supposed to located securely on the central hub for maximum safety - this ensure the wheels are central and stops the wheel nuts taking too much of the load. The hub diameter on the L322 is larger than P38 so you need to fit these inserts into the central hole on your L322 wheels before fitting them to a P38. The inned diameter of these rings is 70.1mm and the outer diameter is 72.6mm. These rings are made from aircraft grade aluminium and have a anodised finish to prevent corrosion.
If you have a spare wheel of the new type please contact us to purchase an extra spigot ring for your spare.
remember you will need to get a new wheel brace as the head on these nuts need a 22mm socket.
Fitting Details
Place the L322 wheels face down on some card and insert the spigot rings to the inside of the L322 wheel. It is advisable to use an adhesive like "Loctitie stud and bearing fix" or similar to prevent the spigot rings from coming out when you change your wheels. Insert the spigot ring so it is flush with the rear surface of the wheel.
Apply some copper grease to the wheel threads and also the inner surface of the spigot ring to make wheel changes easier in future.
Fit the new wheels to the car with the new wheel nuts - checking that the wheel nuts are matched to the wheels ( these nuts have a flat bottom and so the wheel nut recess must be flat not tapered at the bottom.
Which Vehicles will this fit ?
This item WILL fit allow you to fit wheels from a Range Rover L322 02 -05 onto a P38.
This item WILL NOT allow you to fit RR Sport or L322 06 on wheels to your P38
