£10.00

Range Rover L322 2010 Rear light Conversion Indicator Ballast Re

LED Indicator Light Ballast Resistor kit ( PAIR )

Range Rover L322 2010 Rear light Conversion

This listing is for a PAIR of 15 Ohm Resistors to fix the fast flash problem on the Range Rover L322 2010 LED rear light conversion.

The original rear lights used normal bulbs which draw more current than the LED bulbs.

By adding this resistor ACROSS the earth ( Pin 1 / brown ) and the indicator signal wire ( Pin 5 ) this then makes the ECU and flasher unit think that all is OK.

We have done some trials and you can get these lights to work with lower value resistors but these get hot so we have found that 15 Ohm is the highest value resistor ( runs cooler ) that can be used and everything works OK.

This resistor will also stop the check indicator bulb message that can display in the dash.

We also have the rear light mounting inserts - see our other items.

We would recommend that 20 Ohm resistors are used in the headlights if you are also doing this conversion - see our other items for these.

These are not genuine Landrover parts.

The terminals provided are ideal for soldering short wires to and have 2 mounting holes if required.

Power Rating:25W

Resistance:15 ohm

    Resistance Tolerance:± 5%

    Resistor Element Material:Wirewound

    External Length:48mm ( including contacts )

    External Depth:15mm

    External Width:28mm

    Full Power Rating Temperature:20°C

    Insulation Resistance:10000 mohm

    Operating Temperature Range:-55°C to +275°C

    Fixing Centres LxW:20 x 18mm

Fitting Details

Connect one end to the earth wire pin 1 and the other end to the indicator signal on pin 5 .

See below L322 rear wiring pin out.

Which Vehicles will this fit ?

This item will fit Range Rover L322 models from 2002 to 2009 when fitting 2010 LED rear lights ( with LED indicators )


  • Model: Res-15-Ohm-25W#l322


LEGAL DISCLAIMER:
The Products on this site are all Aftermarket products unless specifically identified as a Genuine OEM product. The Non OEM parts we supply are compatible pattern products intended to fit the Jaguar Land Rover vehicles specified. Any reference to and use of descriptions, trade marks and model names is solely to indicate the product suitability for the vehicle specified. Our company is not affiliated with and has no Commercial Connection with Jaguar Land Rover (JLR).


Exchange Goods:
All items marked as exchange items are subject to a surcharge which will be taken at the same time as the original payment for the goods. This surcharge will be returned to the customer by the same payment method as the original payment subject to the condition that the exchange items are returned to us within two weeks for UK orders and four weeks for international orders.

This product was added to our catalog on Friday 09 December, 2011.

Pimp My Range, C/O Speed Culture, Alders Way, Yalberton Ind Estate, Paignton, Devon, TQ4 7QL, Sales@pimpmyrange.co.uk,01803 525750 phone
Copyright © 2024 Pimp My Range. Powered by Zen Cart