Range Rover P38 rear L322 conversion Kit ( Tailgate panel only )

Tailgate Conversion Kit ( Panel Only )

Range Rover P38 upto 2002

A lot of people are now fitting the later L322 front headlights and panels to the Range Rover P38 with stunning results but to date there has not been a cost effective solution for updating the rear of the Range Rover P38. To satisfy this demand we have spent the last 6 months developing this rear end conversion kit. This idea of this kit is to get as close to the appearance of the L322 for minimum cost and effort. This conversion does not require any cutting of your panel work.

The tailgate conversion is simply a matter of removing the light assemblies from the tailgate and then bonding on the supplied over panel that covers down to the lower ridge line ( about 2" from the bottom of the tailgate ). This panel is designed to take the L322 reversing lights ( not supplied but available from Landrover - or see our other listings for these ). The tailgate release switch remains in place.

Full wiring instructions are included in the kit.

No provision is made in the kit for a rear fog lamp - we suggest adding a stand alone fog lamp under the rear bumper.

Looking at the prices on eBay for P38's with L322 conversions it should be possible to recoup all the costs of this upgrade if you decide to sell your car.

We are selling this kit in 2 formats

Format 1 - Lamp panels + Tailgate panel

Format 2 - Lamp panels + Tailgate panel + Lights + Wiring + Bulbs + Fixings

Format 3 - Lamp Panels + Lights + Wiring + Bulbs + Fixings

Format 4 - Tailgate Panel

This listing is for the fibreglass tailgate panel only ( format 4 above )

Kit includes

1 x Lower Tailgate over panel molded from fiberglass designed to accept L322 reversing lamps. This is unpainted.

Instructions.

What else will you need to purchase to complete your conversion

PU bonding compound or similar to bond on tailgate panel.

2 x Genuine Range Rover L322 reversing light units ( Left PN XFD000053 and Right PN XFD000043 ). See our other items for these.

Paint to paint the parts as required.

1 x Rear stand alone fog lamp to mount under the bumper.

Fitting Details

The tailgate panel is a bond over panel - no cutting needed - just remove the original lights and bond on this over panel.

Some adjustment of the rear tailgate catch may be needed - fitting a washer under the catch is one solution.