Rear End Conversion Kit (
Full Kit )
Range Rover P38 upto 2002
A lot of people are now fitting the later
L322 front headlights and panels to the Range Rover P38 with stunning
results but to date there has not been a cost effective solution for
updating the rear of the Range Rover P38. To satisfy this demand we have
spent the last 6 months developing this rear end conversion kit. This
idea of this kit is to get as close to the appearance of the L322 for
minimum cost and effort. This conversion does not require any cutting of
your panel work.
The kit uses Landrover Defender rear
lights ( NAS type ) fitted into specially molded rear light housing
panels. These panels can be painted silver to look similar to the L322
light clusters or they can be painted body colour. As these lights are E
Marked this conversion is road legal and full MOT passing.
The tailgate conversion is simply a
matter of removing the light assemblies from the tailgate and then
bonding on the supplied over panel that covers down to the lower ridge
line ( about 2" from the bottom of the tailgate ). This panel is
designed to take the L322 reversing lights ( not supplied but available
from Landrover - or see our other listings for these ). The tailgate
release switch remains in place.
Full wiring instructions are included in
the kit.
No provision is made in the kit for a
rear fog lamp - we suggest adding a stand alone fog lamp under the rear
bumper.
Looking at the prices on eBay for P38's
with L322 conversions it should be possible to recoup all the costs of
this upgrade if you decide to sell your car.
We are selling this kit
in several formats
Format 1 - Lamp panels + Tailgate panel
Format 2 - Lamp panels + Tailgate panel +
Lights + Wiring + Bulbs + Fixings
Format 3 - Lamp Panels + Lights + Wiring
+ Bulbs + Fixings
Format 4 - Tailgate Panel
This listing is for the Full lamp and
Tailgate conversion kit ( format 2 above )
Kit includes
1x LH rear light housing molded from
fiberglass designed to take NAS type rear lights. This is unpainted.
1x RH rear light housing molded from
fiberglass designed to take NAS type rear lights. This is unpainted.
1x LH rear light inner blanking panel
1x RH rear light inner blanking panel
1 x Lower Tailgate over panel molded from
fiberglass designed to accept L322 reversing lamps. This is unpainted.
2 x Chrome Amber Indicator bulbs - these
look chrome but flash orange when powered up.
2 x Clear crystal NAS type lamps ( fully
E Marked ) complete with bulb holder and mounting gasket
2 x Red crystal NAS type lampls ( Fully E
Marked ) complete with bulb holder and mounting gasket
2 x stop / tail bulbs
1 x Silicone sealer for sealing inner
light blanking plates in position
1 x bolt and screw fixing kit
4 x Wiring connectors for NAS lamps with
a short loom pre-fitted
1 x Full instructions
What else will you need
to purchase to complete your conversion
PU bonding compound or similar to bond on
tailgate panel.
2 x Genuine Range Rover L322 reversing
light units ( Left PN XFD000053 and Right PN XFD000043 ). See our other
listings for these.
Paint to paint the parts as required.
1 x Rear stand alone fog lamp to mount
under the bumper.
Fitting Details
The rear lights bolt into place - no
cutting or bonding required
The tailgate panel is a bond over panel -
no cutting needed - just remove the original lights and bond on this
over panel.
Some adjustment of the rear tailgate
catch may be needed - fitting a washer under the catch is one solution.
This product was added to our catalog on Wednesday 01 February, 2012.